dmesg - GeForce GTX 460
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-23-generic (buildd@crested) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 (Ubuntu 3.2.0-23.36-generic 3.2.14)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000de25a000 (usable)
BIOS-e820: 00000000de25a000 - 00000000de854000 (reserved)
BIOS-e820: 00000000de854000 - 00000000dead4000 (ACPI NVS)
BIOS-e820: 00000000dead4000 - 00000000dead9000 (ACPI data)
BIOS-e820: 00000000dead9000 - 00000000deb1c000 (ACPI NVS)
BIOS-e820: 00000000deb1c000 - 00000000df532000 (usable)
BIOS-e820: 00000000df532000 - 00000000df7f2000 (reserved)
BIOS-e820: 00000000df7f2000 - 00000000df800000 (usable)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000041f000000 (usable)
NX (Execute Disable) protection: active
DMI 2.7 present.
DMI: ECS Z77H2-A2X/Z77H2-A2X, BIOS 4.6.5 03/19/2012
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x41f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask C00000000 write-back
1 base 400000000 mask FF0000000 write-back
2 base 410000000 mask FF8000000 write-back
3 base 418000000 mask FFC000000 write-back
4 base 41C000000 mask FFE000000 write-back
5 base 41E000000 mask FFF000000 write-back
6 base 0E0000000 mask FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 256MB, type WB
reg 2, base: 16640MB, range: 128MB, type WB
reg 3, base: 16768MB, range: 64MB, type WB
reg 4, base: 16832MB, range: 32MB, type WB
reg 5, base: 16864MB, range: 16MB, type WB
reg 6, base: 3584MB, range: 512MB, type UC
total RAM covered: 16368M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 512MB, type WB
reg 6, base: 16880MB, range: 16MB, type UC
e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xdf800 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000fcd20] fcd20
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000098000] 98000 size 20480
init_memory_mapping: 0000000000000000-00000000df800000
0000000000 - 00df800000 page 2M
kernel direct mapping tables up to df800000 @ 1fffb000-20000000
init_memory_mapping: 0000000100000000-000000041f000000
0100000000 - 041f000000 page 2M
kernel direct mapping tables up to 41f000000 @ df520000-df532000
RAMDISK: 364e8000 - 3726c000
ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
ACPI: XSDT 00000000deab0070 0005C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000deabce58 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000deab0160 0CCF7 (v02 ALASKA A M I 00000015 INTL 20051117)
ACPI: FACS 00000000dead2f80 00040
ACPI: APIC 00000000deabcf50 00092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000deabcfe8 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000deabd028 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000deabd060 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000deabd3d0 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000deabdd80 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000041f000000
Initmem setup node 0 0000000000000000-000000041f000000
NODE_DATA [000000041effb000 - 000000041effffff]
[ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040e600000-ffff88041e5fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0041f000
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x000de25a
0: 0x000deb1c -> 0x000df532
0: 0x000df7f2 -> 0x000df800
0: 0x00100000 -> 0x0041f000
On node 0 totalpages: 4185099
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3912 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 892094 pages, LIFO batch:31
Normal zone: 51136 pages used for memmap
Normal zone: 3221568 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000de25a000 - 00000000de854000
PM: Registered nosave memory: 00000000de854000 - 00000000dead4000
PM: Registered nosave memory: 00000000dead4000 - 00000000dead9000
PM: Registered nosave memory: 00000000dead9000 - 00000000deb1c000
PM: Registered nosave memory: 00000000df532000 - 00000000df7f2000
PM: Registered nosave memory: 00000000df800000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at df800000 (gap: df800000:18800000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88041ec00000 s83072 r8192 d23424 u262144
pcpu-alloc: s83072 r8192 d23424 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4117574
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16381576k/17285120k available (6566k kernel code, 544724k absent, 358820k reserved, 6637k data, 920k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:744 16
Extended CMOS year: 2000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3500.063 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 7000.12 BogoMIPS (lpj=14000252)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110623
ftrace: allocating 27049 entries in 107 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz stepping 09
Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 98000
NMI watchdog enabled, takes one hw-pmu counter.
#2
smpboot cpu 2: start_ip = 98000
NMI watchdog enabled, takes one hw-pmu counter.
#3
smpboot cpu 3: start_ip = 98000
NMI watchdog enabled, takes one hw-pmu counter.
#4
smpboot cpu 4: start_ip = 98000
NMI watchdog enabled, takes one hw-pmu counter.
#5
smpboot cpu 5: start_ip = 98000
NMI watchdog enabled, takes one hw-pmu counter.
#6
smpboot cpu 6: start_ip = 98000
NMI watchdog enabled, takes one hw-pmu counter.
#7 Ok.
smpboot cpu 7: start_ip = 98000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 8 CPUs
Total of 8 processors activated (55998.45 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at de854000 (2621440 bytes)
PM: Registering ACPI NVS region at dead9000 (274432 bytes)
print_constraints: dummy:
RTC time: 18:43:20, date: 05/01/12
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000de801018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000de802a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000de803c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff]
pci_root PNP0A08:00: host bridge window [mem 0x41f000000-0xfffffffff]
pci 0000:00:00.0: [8086:0150] type 0 class 0x000600
pci 0000:00:01.0: [8086:0151] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:14.0: [8086:1e31] type 0 class 0x000c03
pci 0000:00:14.0: reg 10: [mem 0xf6300000-0xf630ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: PME# disabled
pci 0000:00:16.0: [8086:1e3a] type 0 class 0x000780
pci 0000:00:16.0: reg 10: [mem 0xf631a000-0xf631a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: [8086:1e2d] type 0 class 0x000c03
pci 0000:00:1a.0: reg 10: [mem 0xf6318000-0xf63183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: [8086:1e20] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xf6310000-0xf6313fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: [8086:1e12] type 1 class 0x000604
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.4: [8086:1e18] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.6: [8086:1e1c] type 1 class 0x000604
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1d.0: [8086:1e26] type 0 class 0x000c03
pci 0000:00:1d.0: reg 10: [mem 0xf6317000-0xf63173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.0: [8086:1e44] type 0 class 0x000601
pci 0000:00:1f.2: [8086:1e02] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 24: [mem 0xf6316000-0xf63167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:1e22] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xf6315000-0xf63150ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:0e22] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xf4000000-0xf5ffffff]
pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xe7ffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xe8000000-0xebffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 30: [mem 0xf6000000-0xf607ffff pref]
pci 0000:01:00.1: [10de:0beb] type 0 class 0x000403
pci 0000:01:00.1: reg 10: [mem 0xf6080000-0xf6083fff]
Freeing initrd memory: 13840k freed
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf60fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xebffffff 64bit pref]
pci 0000:02:00.0: [1283:8893] type 1 class 0x000604
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 02-03] (subtractive decode)
pci 0000:00:1c.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1c.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1c.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1c.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1c.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1c.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1c.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
pci 0000:00:1c.0: bridge window [mem 0x41f000000-0xfffffffff] (subtractive decode)
pci 0000:02:00.0: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:02:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:02:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:02:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:02:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:02:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:02:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x41f000000-0xfffffffff] (subtractive decode)
pci 0000:04:00.0: [1b21:1042] type 0 class 0x000c03
pci 0000:04:00.0: reg 10: [mem 0xf6200000-0xf6207fff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 04-04]
pci 0000:00:1c.1: bridge window [mem 0xf6200000-0xf62fffff]
pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:05:00.0: reg 10: [io 0xd000-0xd0ff]
pci 0000:05:00.0: reg 18: [mem 0xec104000-0xec104fff 64bit pref]
pci 0000:05:00.0: reg 20: [mem 0xec100000-0xec103fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 05-05]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xec100000-0xec1fffff 64bit pref]
pci 0000:06:00.0: [1b21:0612] type 0 class 0x000106
pci 0000:06:00.0: reg 10: [io 0xc050-0xc057]
pci 0000:06:00.0: reg 14: [io 0xc040-0xc043]
pci 0000:06:00.0: reg 18: [io 0xc030-0xc037]
pci 0000:06:00.0: reg 1c: [io 0xc020-0xc023]
pci 0000:06:00.0: reg 20: [io 0xc000-0xc01f]
pci 0000:06:00.0: reg 24: [mem 0xf6100000-0xf61001ff]
pci 0000:00:1c.6: PCI bridge to [bus 06-06]
pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.6: bridge window [mem 0xf6100000-0xf61fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
_OSC request data:1 1f 1f
pci0000:00: Requesting ACPI _OSC control (0x1d)
_OSC request data:1 0 1d
pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d800 - 000000000009ffff
reserve RAM buffer: 00000000de25a000 - 00000000dfffffff
reserve RAM buffer: 00000000df532000 - 00000000dfffffff
reserve RAM buffer: 00000000df800000 - 00000000dfffffff
reserve RAM buffer: 000000041f000000 - 000000041fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3e]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0xe0000000-0xfeafffff window]
pnp 00:00: [mem 0x41f000000-0xfffffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed40000-0xfed44fff]
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io 0x0000-0x001f]
pnp 00:02: [io 0x0081-0x0091]
pnp 00:02: [io 0x0093-0x009f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [mem 0xff000000-0xffffffff]
pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:04: [mem 0xfed00000-0xfed003ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x002e-0x002f]
pnp 00:05: [io 0x004e-0x004f]
pnp 00:05: [io 0x0061]
pnp 00:05: [io 0x0063]
pnp 00:05: [io 0x0065]
pnp 00:05: [io 0x0067]
pnp 00:05: [io 0x0070]
pnp 00:05: [io 0x0080]
pnp 00:05: [io 0x0092]
pnp 00:05: [io 0x00b2-0x00b3]
pnp 00:05: [io 0x0680-0x069f]
pnp 00:05: [io 0x0200-0x020f]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0x0400-0x0453]
pnp 00:05: [io 0x0458-0x047f]
pnp 00:05: [io 0x0500-0x057f]
pnp 00:05: [io 0x164e-0x164f]
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0x0200-0x020f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x0400-0x0453] has been reserved
system 00:05: [io 0x0458-0x047f] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [io 0x0070-0x0077]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x0454-0x0457]
system 00:07: [io 0x0454-0x0457] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io 0x0a20-0x0a3f]
pnp 00:08: [io 0x0a30-0x0a3f]
pnp 00:08: [io 0x0a20-0x0a2f]
system 00:08: [io 0x0a20-0x0a3f] has been reserved
system 00:08: [io 0x0a30-0x0a3f] has been reserved
system 00:08: [io 0x0a20-0x0a2f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x0010-0x001f]
pnp 00:09: [io 0x0022-0x003f]
pnp 00:09: [io 0x0044-0x005f]
pnp 00:09: [io 0x0062-0x0063]
pnp 00:09: [io 0x0065-0x006f]
pnp 00:09: [io 0x0072-0x007f]
pnp 00:09: [io 0x0080]
pnp 00:09: [io 0x0084-0x0086]
pnp 00:09: [io 0x0088]
pnp 00:09: [io 0x008c-0x008e]
pnp 00:09: [io 0x0090-0x009f]
pnp 00:09: [io 0x00a2-0x00bf]
pnp 00:09: [io 0x00e0-0x00ef]
pnp 00:09: [io 0x04d0-0x04d1]
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io 0x00f0-0x00ff]
pnp 00:0a: [irq 13]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0b: [io 0x03f8-0x03ff]
pnp 00:0b: [irq 4]
pnp 00:0b: [dma 0 disabled]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0c: [mem 0xfed10000-0xfed17fff]
pnp 00:0c: [mem 0xfed18000-0xfed18fff]
pnp 00:0c: [mem 0xfed19000-0xfed19fff]
pnp 00:0c: [mem 0xf8000000-0xfbffffff]
pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
pnp 00:0c: [mem 0xfed90000-0xfed93fff]
pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
pnp 00:0c: [mem 0xff000000-0xffffffff]
pnp 00:0c: [mem 0xfee00000-0xfeefffff]
pnp 00:0c: [mem 0xec200000-0xec200fff]
system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0c: [mem 0xec200000-0xec200fff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 2 pci_try_num: 3
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf60fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xebffffff 64bit pref]
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.1: PCI bridge to [bus 04-04]
pci 0000:00:1c.1: bridge window [mem 0xf6200000-0xf62fffff]
pci 0000:00:1c.4: PCI bridge to [bus 05-05]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xec100000-0xec1fffff 64bit pref]
pci 0000:00:1c.6: PCI bridge to [bus 06-06]
pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.6: bridge window [mem 0xf6100000-0xf61fffff]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:02:00.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:00: resource 14 [mem 0x41f000000-0xfffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf60fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xebffffff 64bit pref]
pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:02: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:02: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:02: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:02: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:02: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:02: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:02: resource 14 [mem 0x41f000000-0xfffffffff]
pci_bus 0000:03: resource 8 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 9 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:03: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:03: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:03: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:03: resource 15 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:03: resource 16 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:03: resource 17 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:03: resource 18 [mem 0x41f000000-0xfffffffff]
pci_bus 0000:04: resource 1 [mem 0xf6200000-0xf62fffff]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 2 [mem 0xec100000-0xec1fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:06: resource 1 [mem 0xf6100000-0xf61fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:14.0: PCI INT A disabled
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:01:00.0: Boot video device
pci 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:04:00.0: PCI INT A disabled
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800da25a000 - ffff8800de25a000
software IO TLB at phys 0xda25a000 - 0xde25a000
audit: initializing netlink socket (disabled)
type=2000 audit(1335897799.940:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 32022
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: does not run on family 6 model 58
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-3 state
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
ERST: Table is not found!
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf6316000 port 0xf6316100 irq 41
ata2: SATA max UDMA/133 abar m2048@0xf6316000 port 0xf6316180 irq 41
ata3: SATA max UDMA/133 abar m2048@0xf6316000 port 0xf6316200 irq 41
ata4: SATA max UDMA/133 abar m2048@0xf6316000 port 0xf6316280 irq 41
ata5: SATA max UDMA/133 abar m2048@0xf6316000 port 0xf6316300 irq 41
ata6: SATA max UDMA/133 abar m2048@0xf6316000 port 0xf6316380 irq 41
ahci 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ahci 0000:06:00.0: irq 42 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:06:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:06:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
ahci 0000:06:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xf6100000 port 0xf6100100 irq 42
ata8: SATA max UDMA/133 abar m512@0xf6100000 port 0xf6100180 irq 42
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf6318000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf6317000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 16, io mem 0xf6300000
xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
xhci_hcd 0000:04:00.0: setting latency timer to 64
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:04:00.0: irq 17, io mem 0xf6200000
xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 51 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 12:660:745
rtc_cmos 00:06: setting system clock to 2012-05-01 18:43:21 UTC (1335897801)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-1: new high-speed USB device number 2 using ehci_hcd
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci_hcd
ata3.00: ATA-9: OCZ-VERTEX3, 2.06, max UDMA/133
ata3.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Refined TSC clocksource calibration: 3500.024 MHz.
Switching to clocksource tsc
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
usb 3-1: new full-speed USB device number 2 using xhci_hcd
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.06 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
usb 3-3: new full-speed USB device number 3 using xhci_hcd
usb 3-3: Device not responding to set address.
usb 3-3: Device not responding to set address.
ata8: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 920k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1608k freed
Freeing unused kernel memory: 1196k freed
udevd[147]: starting version 175
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:05:00.0: setting latency timer to 64
r8169 0000:05:00.0: irq 52 for MSI/MSI-X
r8169 0000:05:00.0: eth0: RTL8168evl/8111evl at 0xffffc900065ce000, c8:9c:dc:ee:a3:59, XID 0c900800 IRQ 52
r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usb 3-3: device not accepting address 3, error -71
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
hub 3-0:1.0: unable to enumerate USB device on port 3
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 3-4: new full-speed USB device number 5 using xhci_hcd
usb 3-4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[388]: starting version 175
usb 1-1.2: new high-speed USB device number 4 using ehci_hcd
usb 1-1.6: new high-speed USB device number 5 using ehci_hcd
usb 3-3: new full-speed USB device number 6 using xhci_hcd
Adding 16739692k swap on /dev/sda5. Priority:-1 extents:1 across:16739692k SS
lp: driver loaded but no devices found
wmi: Mapper loaded
input: ELAN USB KEYBOARD as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input2
generic-usb 0003:0566:3015.0001: input,hidraw0: USB HID v1.10 Keyboard [ELAN USB KEYBOARD] on usb-0000:00:14.0-4/input0
mei: module is from the staging directory, the quality is unknown, you have been warned.
mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 53 for MSI/MSI-X
generic-usb: probe of 0003:0566:3015.0002 failed with error -22
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input3
generic-usb 0003:1532:0101.0003: input,hidraw1: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:14.0-3/input0
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input4
generic-usb 0003:1532:0101.0004: input,hidraw2: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:14.0-3/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Bluetooth: Atheros AR30xx firmware driver ver 1.0
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.40 Thu Apr 5 21:37:00 PDT 2012
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
hda_intel: Disabling MSI
snd_hda_intel 0000:01:00.1: setting latency timer to 64
type=1400 audit(1335897816.230:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=760 comm="apparmor_parser"
type=1400 audit(1335897816.230:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=759 comm="apparmor_parser"
type=1400 audit(1335897816.230:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=760 comm="apparmor_parser"
type=1400 audit(1335897816.230:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=759 comm="apparmor_parser"
type=1400 audit(1335897816.230:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=760 comm="apparmor_parser"
type=1400 audit(1335897816.230:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=759 comm="apparmor_parser"
usbcore: registered new interface driver ath3k
usb 1-1.2: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
usb 1-1.1: USB disconnect, device number 3
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: rt73usb-phy0::radio
Registered led device: rt73usb-phy0::assoc
Registered led device: rt73usb-phy0::quality
usbcore: registered new interface driver rt73usb
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
init: failsafe main process (862) killed by TERM signal
type=1400 audit(1335897816.514:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=940 comm="apparmor_parser"
type=1400 audit(1335897816.514:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=933 comm="apparmor_parser"
type=1400 audit(1335897816.514:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=934 comm="apparmor_parser"
type=1400 audit(1335897816.514:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=934 comm="apparmor_parser"
ppdev: user-space parallel port driver
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ath9k_htc 1-1.2:1.0: ath9k_htc: HTC initialized with 33 credits
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:05:00.0: eth0: link down
r8169 0000:05:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
ath9k_htc 1-1.2:1.0: ath9k_htc: FW Version: 1.3
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
ieee80211 phy1: Atheros AR9271 Rev:1
Registered led device: ath9k_htc-phy1
usb 1-1.2: ath9k_htc: USB layer initialized
usbcore: registered new interface driver ath9k_htc
usbcore: registered new interface driver usbserial_generic
USB Serial support registered for FTDI USB Serial Device
ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected
usb 3-1: Detected FT232RL
usb 3-1: Number of endpoints 2
usb 3-1: Endpoint 1 MaxPacketSize 64
usb 3-1: Endpoint 2 MaxPacketSize 64
usb 3-1: Setting MaxPacketSize 64
usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
ADDRCONF(NETDEV_UP): wlan1: link is not ready
ADDRCONF(NETDEV_UP): wlan1: link is not ready
HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe9000000, mapped to 0xffffc90006d00000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
init: plymouth-splash main process (1272) terminated with status 1
usb 1-1.1: new full-speed USB device number 6 using ehci_hcd
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
r8169 0000:05:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
audit_printk_skb: 45 callbacks suppressed
type=1400 audit(1335897834.451:27): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1866 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0